All surfaces must be clean and free of dust, dirt, oils and grease. Make sure the surface is sound and free of loose and flaking paint. Priming the substrate is highly recommended, and do not paint over shiny, smooth surfaces, such as plastic or gloss paints, unless prepared with the right primer.
Crystal Brush should be applied with a high-quality brush. Apply two coats in a cross-hatch pattern to produce an organic look and variation of a glittery, metallic effect. To make application process easier, Crystal Brush can be applied on the surface with a roller in small areas and then immediately back brushed for the effect. Additionally, a flogger brush can be used to soften the second coat while it is drying for a more elegant effect. Apply only during temperate conditions: 50° to 90°F and between 25% and 75% relative humidity.
Depending on surface texture, porosity, and method and concentration of application, Crystal Brush will cover approximately 100 to 160 sq. ft. per gallon with 2 coats.
Recoat time is a minimum of 2-3 hours; dries to touch in 4 hours. Full cure can take up to 7 days, depending on conditions.
Clean brushes, rollers, tools, and equipment with warm, soapy water immediately after use.
Material contains less than 50 grams per liter (0.278 lb. /gal.) Volatile Organic Compounds.
We care about the environment, therefore All MEODED PAINTS products are ECO Friendly!